What is the difference from Aluminum Veneer and Aluminum Composite Panel

Among aluminum veneers, aluminum composite panels, and aluminum honeycomb panels,the most commonly used are aluminum veneers and aluminum composite panels.

The appearance of aluminum veneers were the earliest, and later in the 1960s- 1970s, aluminum composite panels were invented in Germany and quickly became popular around the world.

The below are the differences :

1.The Material and Cost
Aluminum veneer normally chooses 2-4mm thick AA1100 pure aluminum plate or AA3003 aluminum alloy plate. Aluminum composite board generally adopts 3-4mm three-layer structure, including upper and lower two 0 .5mm sandwiched between PVC or PE.

We can see from the material that the cost of aluminum composite panels is definitely much lower than that of aluminum veneers. The current market is probably 4mm thick composite board is lower than the price of 2.5mm thick 120 yuan / square or more, a 10,000 square project, the use of aluminum composite panel will be lower than the use of aluminum veneer to reduce the cost of 1.2 million yuan.

2.The Construction Process
The construction process of aluminum composite panels and aluminum veneers is almostthe same. The difference is that the acm panel is processed into the required shape and specifications at the construction site, and has a large degree of construction freedom. The aluminum veneer is processed and formed by the factory.

Due to the accuracy of the domestic equipment, there are often some small troubles in the construction process. In addition, in terms of the warranty period of the construction process, the mass production of acp sheet is much faster than the production of aluminum veneers, and the schedule of the construction schedule is also higher.